Bagfilter - HSB35 NonStock

APPLICATION

HSB35 Serie Bag Filter are used as a pre filter or fine filter in air conditioning systems for industries.

CONSTRUCTION

The filter media are made from both polymer and glass fibres. They have ultrasonically welded leak-tight bags, assembled in a polyurethane frame. Bag filters are resistant to temperatures of up to 70°C. Moreover, the aluminium frame is a new introduction for AFPRO filters. Its advantage is its great stiffness and the detail or the finish level. The new aluminium frames combined with the aerodynamic finishing strips simplify the installation. Finally, they will have a lower resistance throughout their lifetime.

FILTER CLASS

The bag filters are available in filter classes ISO Coarse 70% in compliance with ISO16890. Also, they are certified by means of the EUROVENT “certify all” system.

SPECIFICATIONS

Application: HVAC, industry
Frame: Galvanised steel, Aluminium
Medium: Synthetic
Gasket: polyurethane
Filterclass according to EN 779:2012: G4
Filterclass according to ISO 16890 : ISO Coarse
Maximal final presssure drop: 250Pa
Highest temperature:  70°C
Maximum relative humidity: 90%

INSTALLATION

• Ensure that the filter is fitted correctly: Suction side – clean air side
• Filter should be correctly installed: no leaks
• Gaskets should be completely undamaged
• Filter should be secured at four points
• Make sure that the filter medium is not folded double
• Take care to avoid damaging the filter during installation
• System should be run in for several hours to achieve the desired result
• Keep filter installation records; note the date, type and initial resistance